Coils
wide strips with a rolled width of 600 mm and more, supplied in coils
Strips
cut from wide strips, width less than 600 mm, supplied in coils
Sheets
sheets cut from wide strips supplied in sheets
Due to their good impact and fatigue resistance, they are used for body mouldings and for car structural components.
HC220P, HC260P according to EN 10268:2006
and in the corresponding grades according to international (ISO) or national technical standards (DIN, JIS, ASTM, ....)
CHEMICAL COMPOSITION
|
Grades according to EN 10268:2006 |
Heat analysis in % | |||||
|---|---|---|---|---|---|---|
| C max. | Mn max. | Si max. | P max. | S max. | Al min. | |
| HC220P | 0,07 | 0,70 | 0,50 | 0,08 | 0,025 | 0,015 |
| HC260P | 0,08 | 0,70 | 0,50 | 0,10 | 0,025 | 0,015 |
MECHANICAL PROPERTIES
|
Grades according to EN 10268:2006 |
Rp0,2 [MPa] | Rm [MPa] min. |
A 80 [%] min. Lo = 80 mm |
r90 min. |
n90 min. |
|---|---|---|---|---|---|
| HC220P | 220 - 270 | 320 - 400 | 32 | 1,3 | 0,16 |
| HC260P | 260 - 320 | 360 - 440 | 29 |
DIMENSIONS OF SHEETS AND COILS
| Nominal thickness [mm] | Width [mm] | |||||||
|---|---|---|---|---|---|---|---|---|
| 750 | 975 | 1 100 | 1 200 | 1 250 | 1 300 | 1 400 | 1 500 | |
| 0,40 - 0,79 | ||||||||
| 0,80 - 0,89 | ||||||||
| 0,90 - 1,49 | ||||||||
| 1,50 - 1,79 | ||||||||
| 1,80 - 1,89 | ||||||||
| 1,90 - 2,00 | ||||||||
DIMENSIONS OF SHEETS
| Thickness [mm] | Length [mm] |
|---|---|
| 0,56 - 1,00 | 1 000 - 3 000 |
| 1,01 - 2,00 | 1 000 - 3 000 |
NOTE: above 3000mm we produce in cooperation
DIMENSIONS OF COILS AND SLIT COILS [mm]
| Thickness | Inner diameter | Outer diameter | Coil | Slit coil | ||
|---|---|---|---|---|---|---|
| Width | Weight | Width | Weight | |||
| 0,56 - 1,30 | approx. 500 or 600 | max. 1 800 | 750 - 1 050 | 3 - 15 kg.mm-1 of width | 21 - 600 | max. 15 000 kg |
| 1 ,31 - 2,00 | approx. 600 | 750 - 1 500 | 2 - 17 kg.mm-1 of width | |||
NOTE: thickness is graded by 0,01 mm.
- THICKNESS TOLERANCES IN ACCORDANCE WITH EN 10131, Re < 260 MPa
-
Nominal thickness Normal tolerances at width Reduced tolerances at width ≤ 1 200 >1 200 ≤ 1 500 ≤ 1 200 >1 200 ≤ 1 500 > 0,40 ≤ 0,60 ± 0,03 ± 0,04 ± 0,025 ± 0,030 > 0,60 ≤ 0,80 ± 0,04 ± 0,05 ± 0,030 ± 0,035 > 0,80 ≤ 1,00 ± 0,05 ± 0,06 ± 0,035 ± 0,040 > 1,00 ≤ 1,20 ± 0,06 ± 0,07 ± 0,040 ± 0,050 > 1,20 ≤ 1,60 ± 0,08 ± 0,09 ± 0,050 ± 0,060 > 1,60 ≤ 2,00 ± 0,10 ± 0,11 ± 0,060 ± 0,070 NOTE: reduced tolerances are subject to prior agreement
- THICKNESS TOLERANCES IN ACCORDANCE WITH EN 10131, 260 ≤ Re < 340 MPa
-
Nominal thickness Normal tolerances at width Reduced tolerances at width ≤ 1 200 >1 200 ≤ 1 500 ≤ 1 200 >1 200 ≤ 1 500 > 0,40 ≤ 0,60 ± 0,04 ± 0,05 ± 0,030 ± 0,035 > 0,60 ≤ 0,80 ± 0,05 ± 0,06 ± 0,035 ± 0,040 > 0,80 ≤ 1,00 ± 0,06 ± 0,07 ± 0,040 ± 0,050 > 1,00 ≤ 1,20 ± 0,07 ± 0,08 ± 0,050 ± 0,060 > 1,20 ≤ 1,60 ± 0,09 ± 0,11 ± 0,060 ± 0,070 > 1,60 ≤ 2,00 ± 0,12 ± 0,13 ± 0,070 ± 0,080 - SHEET FLATNESS TOLERANCES IN ACCORDANCE WITH EN 10131, Re < 260 MPa
-
Nominal width Normal tolerances at thickness Reduced tolerances1) at thickness < 0,70 ≥ 0,70 < 1,20 ≥ 1,20 < 0,70 ≥ 0,70 < 1,20 ≥ 1,20 ≥ 600 < 1 200 10 8 7 5 4 3 ≥ 1 200 < 1 500 12 10 8 6 5 4 ≥ 1 500 17 15 13 8 7 6 1) reduced tolerances are subject to prior agreement
- SHEET FLATNESS TOLERANCES IN ACCORDANCE WITH EN 10131, 260 ≤ Re < 340 MPa
-
Nominal width Normal tolerances at thickness Reduced tolerances1) at thickness < 0,70 ≥ 0,70 < 1,20 ≥ 1,20 < 0,70 ≥ 0,70 < 1,20 ≥ 1,20 ≥ 600 < 1 200 13 10 8 8 6 5 ≥ 1 200 < 1 500 15 13 11 9 8 6 ≥ 1 500 20 19 17 12 10 9 1) reduced tolerances are subject to prior agreement
DOWNLOAD
logistics INFORMATION
We offer flexible product delivery with multiple options for packaging and methods of transportation.
