Coils
wide strips with a rolled width of 600mm and more, supplied in coils
Strips
cut from wide strips, width less than 600mm, supplied in coils
Sheets
sheets cut from wide strips supplied in sheets
CHEMICAL COMPOSITION and MECHANICAL PROPERTIES
kosmalt s240e
| TN USSK 10209-2:2020 | Chemické zloženie - rozbor tavby v % | |||||||
|---|---|---|---|---|---|---|---|---|
| C max. 0,10 |
Mn max. 0,40 |
Si max. 0,25 |
P max. 0,020 |
S max. 0,020 |
B max. 0,005 |
Al max. 0,020 |
Ti max. 0,10 |
|
| Rp0,2 | min. 240 MPa | |||||||
| Rm | 300 - 450 MPa | |||||||
| A Lo=5,65 Ös0 | min. 30% | |||||||
kosmalt s300e
| TN USSK 10209-2:2020 | Chemical composition - melt analysis in % | |||||||
|---|---|---|---|---|---|---|---|---|
| C max. 0,10 |
Mn max. 0,40 |
Si max. 0,25 |
P max. 0,020 |
S max. 0,020 |
B max. 0,005 |
Al max. 0,020 |
Ti max. 0,10 |
|
| Rp0,2 | min. 300 MPa | |||||||
| Rm | 350 - 500 MPa | |||||||
| A Lo=5,65 Ös0 | min. 26% | |||||||
kosmalt s355e
| TN USSK 10209-2:2020 | Chemical composition - melt analysis in % | |||||||
|---|---|---|---|---|---|---|---|---|
| C max. 0,10 |
Mn max. 0,40 |
Si max. 0,25 |
P max. 0,020 |
S max. 0,020 |
B max. 0,005 |
Al max. 0,020 |
Ti max. 0,10 |
|
| Rp0,2 | min. 355 MPa | |||||||
| Rm | 430 - 580 MPa | |||||||
| A Lo=5,65 Ös0 | min. 17% | |||||||
DIMENSIONS OF SHEETS AND COILS [mm]
Re < 280 MPa
| Nominal thickness [mm]1) | Width [mm] 1) (data in brackets represent the widths of the sheets with trimmed edges) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 780 (750) | 940 (900) | 1040 (1000) | 1140 (1100) | 1290 (1250) | 1440 (1400) | 1540 (1500) | |||
| 1,80 - 1,99 | 3) | ||||||||
| 2,00 - 2,19 | Length of sheets: 2000-4000mm4) | 3) | |||||||
| 2,20 - 2,49 | 3) | ||||||||
| 2,50 - 2,99 | 3) | ||||||||
| 3,00 - 3,49 | 3) | ||||||||
| 3,50 - 3,99 | |||||||||
| 4,00 - 4,99 | |||||||||
| 5,00 - 5,99 | Lenght of sheets: 2 000 - 6 000 5) | ||||||||
| 6,00 - 12,50 2) | |||||||||
1) Basic thickness dimensions graded by 0,05 mm, eidth by 5,00 mm
2) Thickness 6,01-12,50 mm by agreement of the parties, other dimensions are subject to prior agreement
3) Without guarantee of flatness
4) On agreement sheets are delivered up to lenght of 6 000 mm; lenghts above 4 000 mm without flatness guarantee. Lenghth is graded by 50 mm
5) On agreement sheets are delivered up to length of 12 000 mm; lengths above 6 000 mm without flatness guarantee. Length is graded by 50 mm
DIMENSIONS OF SHEETS AND COILS
Re 280 - 360 MPa
| Nominal thickness [mm]1) | Width [mm] 1) (data in brackets represent the widths of the sheets with trimmed edges) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 780 (750) | 940 (900) | 1040 (1000) | 1140 (1100) | 1290 (1250) | 1440 (1400) | 1540 (1500) | |||||
| 2,00 - 2,19 | Length of sheets: 2 000 - 4 000 4) mm | ||||||||||
| 2,20 - 2,49 | 3) | ||||||||||
| 2,50 - 2,99 | 3) | ||||||||||
| 3,00 - 3,49 | 3) | ||||||||||
| 3,50 - 3,99 | 3) | ||||||||||
| 4,00 - 4,99 | |||||||||||
| 5,00 - 5,99 | Lenght of sheets: 2 000 - 6 000 5) | ||||||||||
| 6,00 - 12,50 2) | |||||||||||
1) Basic thickness dimensions graded by 0,05 mm, eidth by 5,00 mm
2) Thickness 6,01-12,50 mm by agreement of the parties, other dimensions are subject to prior agreement
3) Without guarantee of flatness
4) On agreement sheets are delivered up to lenght of 6 000 mm; lenghts above 4 000 mm without flatness guarantee. Lenghth is graded by 50 mm
5) On agreement sheets are delivered up to length of 12 000 mm; lengths above 6 000 mm without flatness guarantee. Length is graded by 50 mm
DIMENSION OF SLIT COILS
Re < 360 MPa
| Nominal thickness 1) | Width of slit coil [mm]1) | ||||
|---|---|---|---|---|---|
| 110 - 510 | 511 - 550 | 551 - 580 | |||
| 1,80 2) - 2,09 | |||||
| 2,10 - 2,29 | |||||
| 2,30 - 2,49 | |||||
| 2,50 - 2,99 |
|
||||
| 3,00 - 3,59 | |||||
| 3,60 - 6,00 | |||||
| 6,01 - 8,00 2) | |||||
1) Basic grading of thickness by 0,05 mm, width by 5 mm
2) Thickness 6,01-8,00 mm by agreement of the parties
Other dimensions are subject to prior agreement
THICKNESS TOLERANCES IN ACCORDANCE WITH EN 10051:2010 AND U. S. Steel Košice, s.r.o.
Re ≤ 300 MPa
| Nominal thickness [mm] |
Thickness tolerances at nominal widths [mm] | ||||||
|---|---|---|---|---|---|---|---|
|
≤ 1200 |
1200 ≤ 1500 | > 1500 ≤ 1800 1) | |||||
| EN | U. S. Steel Košice | EN | U. S. Steel Košice | EN | U. S. Steel Košice | ||
|
≤ 2,00 |
± 0,17 | ± 0,15 | - | - | - | - | |
| > 2,00 ≤ 2,50 | ± 0,18 | ± 0,15 | ± 0,21 | ± 0,17 | ± 0,23 | ± 0,17 | |
| > 2,50 ≤ 3,00 | ± 0,20 | ± 0,15 | ± 0,22 | ± 0,17 | ± 0,24 | ± 0,17 | |
| > 3,00 ≤ 4,00 | ± 0,22 | ± 0,18 | ± 0,24 | ± 0,21 | ± 0,26 | ± 0,21 | |
| > 4,00 ≤ 5,00 | ± 0,24 | ± 0,18 | ± 0,26 | ± 0,21 | ± 0,28 | ± 0,21 | |
| > 5,00 ≤ 6,00 | ± 0,26 | ± 0,19 | ± 0,28 | ± 0,21 | ± 0,29 | ± 0,21 | |
| > 6,00 ≤ 8,00 | ± 0,29 | ± 0,21 | ± 0,30 | ± 0,24 | ± 0,31 | ± 0,24 | |
| > 8,00 ≤ 10,00 | ± 0,32 | ± 0,21 | ± 0,33 | ± 0,24 | ± 0,34 | ± 0,24 | |
| > 10,00 ≤ 12,50 | ± 0,35 | ± 0,21 | ± 0,36 | ± 0,24 | ± 0,37 | ± 0,24 | |
THICKNESS TOLERANCES IN ACCORDANCE WITH EN 10051:2010 AND U. S. Steel Košice, s.r.o.
300 MPa < Re ≤ 360 MPa
| Nominal thickness [mm] |
Thickness tolerances at nominal widths [mm] | ||||||
|---|---|---|---|---|---|---|---|
|
≤ 1200 |
1200 ≤ 1500 | > 1500 ≤ 1800 1) | |||||
| EN | U. S. Steel Košice | EN | U. S. Steel Košice | EN | U. S. Steel Košice | ||
|
≤ 2,00 |
± 0,20 | ± 0,17 | - | - | - | - | |
| > 2,00 ≤ 2,50 | ± 0,21 | ± 0,18 | ± 0,24 | ± 0,19 | ± 0,26 | ± 0,19 | |
| > 2,50 ≤ 3,00 | ± 0,23 | ± 0,19 | ± 0,25 | ± 0,21 | ± 0,28 | ± 0,21 | |
| > 3,00 ≤ 4,00 | ± 0,25 | ± 0,21 | ± 0,28 | ± 0,23 | ± 0,30 | ± 0,23 | |
| > 4,00 ≤ 5,00 | ± 0,28 | ± 0,22 | ± 0,30 | ± 0,24 | ± 0,32 | ± 0,24 | |
| > 5,00 ≤ 6,00 | ± 0,30 | ± 0,24 | ± 0,32 | ± 0,27 | ± 0,33 | ± 0,27 | |
| > 6,00 ≤ 8,00 | ± 0,33 | ± 0,27 | ± 0,35 | ± 0,29 | ± 0,36 | ± 0,29 | |
| > 8,00 ≤ 10,00 | ± 0,37 | ± 0,29 | ± 0,38 | ± 0,32 | ± 0,39 | ± 0,32 | |
| > 10,00 ≤ 12,50 | ± 0,40 | ± 0,31 | ± 0,41 | ± 0,34 | ± 0,43 | ± 0,34 | |
1) Maximum width of U. S. Steel Košice´s hot rolled products is 1540 mm.
SHEET FLATNESS TOLERANCES IN ACCORDANCE WITH EN 10051:2010
Re ≤ 300 MPa
| Nominal thickness [mm] |
Normal sheet flatness tolerances depending on width [mm] | ||
|---|---|---|---|
| < 1200 | 1200 - 1500 | > 1500 1) | |
| ≤ 2,00 | 18 | 20 | 25 |
| > 2,00 ≤ 12,50 | 15 | 18 | 23 |
1) Maximum width of U. S. Steel Košice´s hot rolled products is 1 540 mm.
For Re > 300 MPa is proportionally higher - please, see EN 10051:2010
DOWNLOAD
Logistics information
We offer flexible product delivery with multiple options for packaging and methods of transportation.
WE PRODUCE FOR SUSTAINABILITY
All processes in society are subject to interest in sustainability in the field of environmental, social and company management. So our steels bear a sign of sustainability.
