Search:

Prázdny
Prázdny

DRAWING STEEL

Prázdny

In category Hot Dip Galvanized steel

Prázdny

 

 

CHARAcTERISTIcs

Hot dip galvanized sheets made of drawing grades are suitable for cold forming and deep-drawing. The sheets are used for the production of automobile parts appliences, in building industry and for production of profiles, corrugated sheets, roof coverings and engineering.

product forms

Coils

wide strips with a rolled width of 600mm and more, supplied in coils

Strips

cut from wide strips, width less than 600mm, supplied in coils

Sheets

sheets cut from wide strips supplied in sheets

key features

DX51D, DX52D, DX53D, DX54D, DX56D, DX57D

Grades according to EN 10346:2015

CR1, CR2, CR3, CR4, CR5

Grades according to VDA 239-100:2016

CR6

Grades according to VW 50065:2019

and in corresponding grades according to international (ISO), national technical standards (JIS, ASTM, ....) or other technical standards used in the automotive industry
Grades are produced with zinc coating (+Z - coating designation according to EN 10346:2015 or -GI coating designation according to VDA 239-100:2016) and/or zinc-iron alloy coating (+ZF - coating designation according to EN 10346:2015 or -GA coating designation according to VDA 239-100:2016)

TECHNICAL SPECIFICATION

CHEMICAL COMPOSITION

Grades according to
EN 10346:2015
VDA 239-100:2016		 Heat analysis in %
CMAX MnMAX SiMAX PMAX SMAX AlMIN TiMAX CuMAX
DX51D + Z, + ZF 0,18 1,20 0,50 0,120 0,045 -  0,30 -
DX52D + Z, + ZF 0,12 0,60 0,50 0,100 0,045 -  0,30 -
CR1-GI,-GA 0,12 0,60 0,50 0,055 0,035 0,010 0,30 0,20
DX53D + Z, + ZF 0,12 0,60 0,50 0,100 0,045 -  0,30 -
CR2-GI,-GA 0,10 0,50 0,50 0,025 0,020 0,010 0,30 0,20
DX54D + Z, + ZF 0,12 0,60 0,50 0,100 0,045 -  0,30 -
CR3-GI,-GA 0,08 0,50 0,50 0,025 0,020 0,010 0,30 0,20
DX56D + Z, + ZF 0,12 0,60 0,50 0,100 0,045 -  0,30 -
CR4-GI,-GA 0,06 0,40 0,50 0,025 0,020 0,010 0,30 0,20
DX57D + Z, + ZF 0,12 0,60 0,50 0,100 0,045 -  0,30 -
CR5-GI,-GA 0,02 0,30 0,50 0,020 0,020 0,010 0,30 0,20
CR6-GI,-GA1) 0,01 0,20 0,50 0,020 0,020 0,010 0,20 0,20

1) according to VW 50065:2019

MECHANICAL PROPERTIES

Grades according to
EN 10346:2015
VDA 239-100:2016		 Rp0,2
[MPa]		 Rm
[MPa]		 A MIN (%)
Lo = 80 mm		 r90
min.		 rm
min.		 n90
min.
DX51D + Z, + ZF - 270 - 500 22 -   -
DX52D + Z, + ZF 140 - 300 (360)2) 270 - 420 26 -   -
CR1-GI,-GA3) 140 - 300 270 - 410 28 - - -
DX53D + Z, + ZF 140 - 260 270 - 380 30 -   -
CR2-GI,-GA3) 140 - 240 270 - 370 34 1,3 1,2 0,16
DX54D + Z, + ZF 120 - 220 260 - 350 36; (34)1) 1,60; (1,40)1) - 0,18
CR3-GI,-GA3) 140 - 210 270 - 350 38 1,8 1,5 0,18
DX56D + Z, + ZF 120 - 180 260 - 350 39; (37)1) 1,90; (1,70)1) - 0,21; (0,20)1)
CR4-GI,-GA3) 140 - 180 270 - 330 39 1,9 1,6 0,2
DX57D + Z, + ZF 120 - 170 260 - 350 41, (39)1) 2,1; (1,9)1) - 0,22; (0,20)1)
CR5-GI,-GA3) 110 - 170 260 - 330 41 2,1 1,8 0,22
CR6-GI,-GA3) 110 - 170 250 - 330 43 2,3 2 0,23

1) suitable for ZF
2) suitable for surface quality A
3) reduction of prescribed values for GA coated products graded by thickness:
          t < 0,60 mm - 4 - 0,4 - 0,2
          0,60 mm ≤ t ≤ 1,60 mm - 2 - 0,2 - 0,15
          t > 1,60 mm - 2 - 0,4 - 0,2

DIMENSIONS OF SHEETS AND COILS

Nominal thickness [mm] Width [mm]
  800 1000 1260 1330 1460 1500
0,40 - 0,49              
0,50 - 0,59            
0,60 - 0,79          
0,80 - 0,89        
0,90 - 2,00      
2,01 - 2,501)      

1) only DX51D+Z

Nominal thickness [mm] Sheet length [mm] Coil diameter [mm] Slit coil width Nominal coil weight
[kg.mm -1 of width]
inner outer
0,40 - 2,00 1 000 - 3 100 approx. 500 max. 1 400 40 - 600
(depending on sheet thickness)		 3 - 9,9
approx.600 2 - 9,4
2,01 - 2,501)          

1) only DX51D+Z
NOTE: - thickness is graded by 0,01 mm, width is graded by 5,0 mm, length is graded by 5 mm
- nominal thickness includes zinc coat

Dimensional tolerances according to EN 10143:2006. Tighter tolerances by agreement.

If you need specific parameters that are not listed here, please contact us

DOWNLOAD

Declaration of conformity

General delivery terms and conditions

Logistics information

We offer flexible product delivery with multiple options for packaging and methods of transportation.

More     

D R A W I N G   S T E E L

CONTACT

CONTACT US PERSONALLY

Milan Beličák

Director Sales Czech Republic and Slovakia

    +421 556 734 598

    +421 903 601 790

    mbelicaksk.uss.com

Milan Malík

Director Sales Poland

  +421 556 734 654

  +421 903 627 471

  mmaliksk.uss.com

Eva Širilová

Director Sales West Europe

  +421 556 734 016

  +421 917 656 761

  esirillovask.uss.com

Ján Rohár

Director Sales South & East Europe and Export

  +421 556 734 596

  +421 903 616 433

  jroharsk.uss.com

Dušan Dzurovčin

Director Sales Austria

  +421 556 734 538

  +421 917 731 813

  ddzurovcinsk.uss.com

How can we help your business grow ?

If you are interested in cooperation, do not hesitate to write us a message. We will contact you immediately with a specific offer.

We use cookies so that we can provide you with the best user experience possible. More info...